Description
Bussiness Information
Bussiness Seller:Dongguan Daly Electronics Co., Ltd.
Bussiness Type:Consumer Electronics
VAT Number：DE350696468
Bussiness Address:Floor 20, building 7, No. 14, Gongye South Road, Songshanhu Park,Dongguan City, Guangdong Province ,China 523808
Daly Smart BMS Bluetooth LiFePo4 4S 36V 48V 30A 60A 100A 120A 150A 200A 250A 500A Li-Ion BMS 3S 12v 6s 7S 8S 10S 12S 13S 16S 20S
Product Description
◆This Link can only support Bluetooth and UART communication.If you need other function,please contact with seller before you place order.
◆ BMS shipping package includes accessories BT module *1pcs and balance cable *1pcs and English manual *1pcs and temperature sensor(NTC cable).
◆Please buy the accessory from below link:
If you need active balancer, please choose bms from below link :
◆For our smart bms,when first use,need to activate first,then B- P- can be conductive,voltage from P- can be same from B-, then BMS can work well.
Activation method:
Method ①: Purchase the power board,there is an activation switch on the board and click the button.
Purchase link is
Method ②: Press thebuttonon the bluetooth module to activate the bms directly.
Method ③: Charge activation, B-line must be connected to the total negative pole of the battery pack when
charging . 3S~5S, J series (10J, 16J ) BMS only can be activated by this way.
◆ the Android and IOS APP available to download.
◆ Pls refer to following link to understand bluetooth set up by APP.
◆ Pls refer to following link to understand PC function set up by PC software
Main Functions Description:
Over-charging protection: Yes
Over-discharging protection: Yes
Over-current protection:Yes
Temperature protection: Yes
Disconnect protection: Yes
Short Circuit Protection : Yes
Short Circuit protect recover : Yes
Balance Function: Yes
More specific parameter values are in the description picture
Advantages:
1. BMS was be manufactured by high quality Mos and IC imported . Keep your battery long cycle service life time.
2. Use top quality (A-level) protective integrated circuit IC, from the solution of Japan.
3. Extreme low power consumption. The consumption of the whole device is less than 50uA.
4. PCB use high anti-corrosion, high water resistance, high impedance ESD conformal Coating
